Geometrical Considerations for the Design of Liquid-phase Biochemical Sensors Using a Cantilever\u27s Fundamental In-plane Mode

The influence of the beam geometry on the quality factor and resonance frequency of resonant silicon cantilever beams vibrating in their fundamental in-plane flexural mode in water has been investigated. Compared to cantilevers vibrating in their first out-of-plane flexural mode, utilizing the in-plane mode results in reduced damping and reduced mass loading by the surrounding fluid. Quality factors as high as 86 have been measured in water for cantilevers with a 20 μm thick silicon layer. Based on the experimental data, design guidelines are established for beam dimensions that ensure maximal Q-factors and minimal mass loading by the surrounding fluid, thus improving the limit-of-detection of mass-sensitive biochemical sensors. Elementary theory is also presented to help explain the observed trends. Additional discussion focuses on the tradeoffs that exist in designing liquid-phase biochemical sensors using in-plane cantilevers

Unconventional Uses of Microcantilevers as Chemical Sensors in Gas and Liquid Media

The use of microcantilevers as (bio)chemical sensors usually involves the application of a chemically sensitive layer. The coated device operates either in a static bending regime or in a dynamic flexural mode. While some of these coated devices may be operated successfully in both the static and the dynamic modes, others may suffer from certain shortcomings depending on the type of coating, the medium of operation and the sensing application. Such shortcomings include lack of selectivity and reversibility of the sensitive coating and a reduced quality factor due to the surrounding medium. In particular, the performance of microcantilevers excited in their standard out-of-plane dynamic mode drastically decreases in viscous liquid media. Moreover, the responses of coated cantilevers operating in the static bending mode are often difficult to interpret. To resolve these performance issues, the following emerging unconventional uses of microcantilevers are reviewed in this paper: (1) dynamic-mode operation without using a sensitive coating, (2) the use of in-plane vibration modes (both flexural and longitudinal) in liquid media, and (3) incorporation of viscoelastic effects in the coatings in the static mode of operation. The advantages and drawbacks of these atypical uses of microcantilevers for chemical sensing in gas and liquid environments are discussed

On the Relative Sensitivity of Mass-sensitive Chemical Microsensors

In this work, the chemical sensitivity of mass-sensitive chemical microsensors with a uniform layer sandwich structure vibrating in their lateral or in-plane flexural modes is investigated. It is experimentally verified that the relative chemical sensitivity of such resonant microsensors is -to a first order- independent of the microstructure\u27s in-plane dimensions and the flexural eigenmode used, and only depends on the layer thicknesses and densities as well as the sorption properties of the sensing film. Important implications for the design of mass-sensitive chemical microsensors are discussed, whereby the designer can focus on the layer stack to optimize the chemical sensitivity and on the in-plane dimensions and mode shape to optimize the resonator\u27s frequency stability

The decay and collisions of dark solitons in superfluid Fermi gases

We study soliton collisions and the decay of solitons into sound in superfluid Fermi gases across the Bose-Einstein condensate to Bardeen-Cooper-Schrieffer (BEC-BCS) crossover by performing numerical simulations of the time-dependent Bogoliubov-de Gennes equations. This decay process occurs when the solitons are accelerated to the bulk pair-breaking speed by an external potential. A similar decay process may occur when solitons are accelerated by an inelastic collision with another soliton. We find that soliton collisions become increasingly inelastic as we move from the BEC to BCS regimes, and the excess energy is converted into sound. We interpret this effect as being due to evolution of Andreev bound states localized within the soliton.Comment: 9 pages, 5 figure

Effect of Hydrodynamic Force on Microcantilever Vibrations: Applications to Liquid-Phase Chemical Sensing

At the microscale, cantilever vibrations depend not only on the microstructure’s properties and geometry but also on the properties of the surrounding medium. In fact, when a microcantilever vibrates in a fluid, the fluid offers resistance to the motion of the beam. The study of the influence of the hydrodynamic force on the microcantilever’s vibrational spectrum can be used to either (1) optimize the use of microcantilevers for chemical detection in liquid media or (2) extract the mechanical properties of the fluid. The classical method for application (1) in gas is to operate the microcantilever in the dynamic transverse bending mode for chemical detection. However, the performance of microcantilevers excited in this standard out-of-plane dynamic mode drastically decreases in viscous liquid media. When immersed in liquids, in order to limit the decrease of both the resonant frequency and the quality factor, and improve sensitivity in sensing applications, alternative vibration modes that primarily shear the fluid (rather than involving motion normal to the fluid/beam interface) have been studied and tested: these include in-plane vibration modes (lateral bending mode and elongation mode). For application (2), the classical method to measure the rheological properties of fluids is to use a rheometer. However, such systems require sampling (no in-situ measurements) and a relatively large sample volume (a few milliliters). Moreover, the frequency range is limited to low frequencies (less than 200Hz). To overcome the limitations of this classical method, an alternative method based on the use of silicon microcantilevers is presented. The method, which is based on the use of analytical equations for the hydrodynamic force, permits the measurement of the complex shear modulus of viscoelastic fluids over a wide frequency range

A study of the neglected Galactic HII region NGC 2579 and its companion ESO 370-9

The Galactic HII region NGC 2579 has stayed undeservedly unexplored due to identification problems which persisted until recently. Both NGC 2579 and its companion ESO 370-9 have been misclassified as planetary or reflection nebula, confused with each other and with other objects. Due to its high surface brightness, high excitation, angular size of few arcminutes and relatively low interstellar extinction, NGC 2579 is an ideal object for investigations in the optical range. Located in the outer Galaxy, NGC 2579 is an excellent object for studying the Galactic chemical abundance gradients. In this paper we present the first comprehensive observational study on the nebular and stellar properties of NGC 2579 and ESO 370-9, including the determination of electron temperature, density structure, chemical composition, kinematics, distance, and the identification and spectral classification of the ionizing stars, and discuss the nature of ESO 370-9. Long slit spectrophotometric data in the optical range were used to derive the nebular electron temperature, density and chemical abundances and for the spectral classification of the ionizing star candidates. Halpha and UBV CCD photometry was carried out to derive stellar distances from spectroscopic parallax and to measure the ionizing photon flux.Comment: To be published in Astronomy & Astrophysic